Posted on: 25 February 2022
Hydraulic tools are an essential tool to have when you are working with hydraulics. It seems that hydraulic leaks are a very common problem with these types of tools because there isn't always an easy way to find them. Some people might try to use dye, or even just hose compression, to track down the location of the leak. The following information will explain how to identify hydraulic leaks and have problems repaired.
Common Hydraulic Tool Issues
Hydraulic tools can be very beneficial to mechanics and other people that need power tools. They are very powerful, but they are also fragile. Many things can cause damage to a hydraulic tool.
Leaks often occur when an O ring becomes worn or damaged. The fluid will start to leak out of the tool when this happens. This is not a big issue as long as it is taken care of immediately. If you notice your tool is leaking, you should stop using it immediately and inspect the part where the leak is coming from. If it is an O ring that needs to be replaced, you may be able to do so yourself. Contact a professional for assistance if the issue is something more serious, such as cracks, failed seals, or other damage.
Identifying Difficult Hydraulic System Leaks
Sometimes, identifying the source of a leak is the most difficult part of the repair process. If you have trouble pinpointing the leak, there are several steps you can take to get a closer look at your hydraulic system:
- Look for signs of leaks on the outside of your hydraulic tool or low levels in the reservoir.
- Your hydraulic tool may have a quick-connect fitting or removable panels that allow you to access internal components of your tool. Check for leaks around these areas or remove them if possible to see whether there are any leaks inside your tool.
- If you still can't find where the leak is originating, use a little bit of soapy water and apply it directly to specific parts of your tool, such as control valves, pipe fittings, or hoses. If bubbles form at any of these locations, you've found where your leak is originating from and can proceed with repairs.
If you still can't find the leak, you want to have a professional repair service inspect the tool.
Hydraulic tool repairs can be done professionally if you can't do them on your own. Contact a tool repair service—like Greenlee tool repair—to get the professional help you need fixing your tools.Share